(Jan-2018 Dumps) – Real Cisco 300-209 Exam Practice Questions

VCE-Braindumps understands the importance of all key topics of Cisco Certified Network Professional Service Provider 300-209 exam so that we prepare 300-209 exam dumps material is prepared according to the 300-209 exam pattern. You feel in the actual Cisco 300-209 exam confident enough to attempt each 300-209 exam question perfectly. Just check the 300-209 exam free demo first to have an idea what exactly VCE-Braindumps has prepared for you and offering with Money Back Guarantee!

♥♥ 2018 NEW RECOMMEND 300-209 Exam Questions ♥♥

300-209 exam questions, 300-209 PDF dumps; 300-209 exam dumps:: https://www.dumpsschool.com/300-209-exam-dumps.html (276 Q&A) (New Questions Are 100% Available! Also Free Practice Test Software!)

Latest and Most Accurate Cisco 300-209 Dumps Exam Questions and Answers:

Version: 16.1
Question: 21

You are troubleshooting a site-to-site VPN issue where the tunnel is not establishing. After issuing the debug crypto isakmp command on the headend router, you see the following output. What does this output suggest?
1d00h: ISAKMP (0:1): atts are not acceptable. Next payload is 0
1d00h: ISAKMP (0:1); no offers accepted!
1d00h: ISAKMP (0:1): SA not acceptable!
1d00h: %CRYPTO-6-IKMP_MODE_FAILURE. Processing of Main Mode failed with peer at 10.10.10.10

A. Phase 1 policy does not match on both sides.
B. The transform set does not match on both sides.
C. ISAKMP is not enabled on the remote peer.
D. There is a mismatch in the ACL that identifies interesting traffic.

Answer: A

Question: 22

You are troubleshooting a site-to-site VPN issue where the tunnel is not establishing. After issuing the debug crypto ipsec command on the headend router, you see the following output. What does this output suggest?
1d00h: IPSec (validate_proposal): transform proposal
(port 3, trans 2, hmac_alg 2) not supported
1d00h: ISAKMP (0:2) : atts not acceptable. Next payload is 0
1d00h: ISAKMP (0:2) SA not acceptable

A. Phase 1 policy does not match on both sides.
B. The Phase 2 transform set does not match on both sides.
C. ISAKMP is not enabled on the remote peer.
D. The crypto map is not applied on the remote peer.
E. The Phase 1 transform set does not match on both sides.

Answer: B

Question: 23

Which four activities does the Key Server perform in a GETVPN deployment? (Choose four.)

A. authenticates group members
B. manages security policy
C. creates group keys
D. distributes policy/keys
E. encrypts endpoint traffic
F. receives policy/keys
G. defines group members

Answer: A, B, C, D

Question: 24

Where is split-tunneling defined for remote access clients on an ASA?

A. Group-policy
B. Tunnel-group
C. Crypto-map
D. Web-VPN Portal
E. ISAKMP client

Answer: A

Question: 25

Which of the following could be used to configure remote access VPN Host-scan and pre-login policies?

A. ASDM
B. Connection-profile CLI command
C. Host-scan CLI command under the VPN group policy
D. Pre-login-check CLI command

Answer: A

Question: 26

In FlexVPN, what command can an administrator use to create a virtual template interface that can be configured and applied dynamically to create virtual access interfaces?

A. interface virtual-template number type template
B. interface virtual-template number type tunnel
C. interface template number type virtual
D. interface tunnel-template number

Answer: B

Here is a reference an explanation that can be included with this test.
http://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/15-2mt/sec-flex-spoke.html#GUID-4A10927D-4C6A-4202-B01C-DA7E462F5D8A
Configuring the Virtual Tunnel Interface on FlexVPN Spoke
SUMMARY STEPS
1. enable
2. configure terminal
3. interface virtual-template number type tunnel
4. ip unnumbered tunnel number
5. ip nhrp network-id number
6. ip nhrp shortcut virtual-template-number
7. ip nhrp redirect [timeout seconds]
8. exit

New Updated 300-209 Exam Questions 300-209 PDF dumps 300-209 practice exam dumps: https://www.dumpsschool.com/300-209-exam-dumps.html